LED
Ammeter Function:
After the motor runs smoothly, turn the overcurrent setting knob slowly counter clockwise to the red indicator light, which is 100% of the actual running current. And then turn the knob clockwise to just turn off the red light at this point for the actual running current value of about 103%.
Run / Operation Indicator:
Relay Trip: Orange LED
Power / normal operating status: Green LED
Manual / Electric Reset
With test button ehld down,the orange LED is on and the product will trip after O-TIME.
The relay will be de-energized when RESET button is pushed or the control power is disconnected.
Set
Set knob: D-TIME(Delay Time) Set two to three seconds longer than the motor starting time.
Set knob: O-TIME(Over-current run time) Set less than the motor's endurance time with over-current.
Set knob: Load(Rated Current) Set over 110% of the motor's rated current of under 120% of its operating current
TEST Instruction
With test button held down,the orange LED is on and the product will trip after O-TIME.
The relay will be de-energized when RESET button is pushed or the control power is disconnected.
Operating Power...........: <2W
Waiting(t)......................: D-Time 0.2-30s
O-Time 0.2-10s
Asymmetry Set.............: %±10
Contact.........................: 5A 250VAC Resistive Load
Connection Diagrams..: 35mm Din Rail(D) or
Pane(P)
Dimensions
Construction
Connection Diagram
Power Source : AC
Theory : Thermal Relay
is_customized : Yes
Contact Load : Low Power
Model Number : EOCRSS(Premium Type)
Voltage : 220VAC/DC
Use : Protective
Protect Feature : Sealed
Operating Voltage(Un) : 24-260VAC/DC
Current Range(A) : 0.5-6A / 3-30A / 5-60A
Main Circuit Wiring : Through Core
Relay Output : 1a1b
Protected Object : motor
model : EOCR
