360° Rotating Bathtub Tray Table – Wall-Mounted Spa Shelf with Anti-Slip Surface & Drain Port, Large 23.2" x 14.6" ABS & Stainless Steel Bath Caddy

Key Features

High-quality Materials: It is made of high-quality 304 stainless steel, PP material, and ABS material, which is strong, durable, and not easy to rust. The product materials are good, which can extend the service life.

Physical and Mental Relaxation: With it, you will not be bored during the SPA and it gives your mind and body proper relaxation.

Large Capacity: The size of the tray is 59*37cm/23.2*14.6inch, which is relatively large. So you can put a lot of items on it.

Easy to Clean: The tray is detachable and has a drain port at its edge, so you can wipe it gently with a towel to keep it dry, which is very convenient.

Taking up Less Space: Compared to the common floor-standing tray, it does not take up any floor space. You just need to fix it on the side of the bathtub. And its small and compact structure does not take up too much space.

Good Stability: The fixed base of the product has eight reserved screw holes. It is equipped with screws and screw hole plugs. These two long screws can play a role in fixing the tube, so the product has good stability and is not easy to fall off.

Rotatable Design: The tray of this product can be rotated 360 degrees, so you can use it freely and flexibly, which greatly enhances the convenience of use.

Anti-slip Panel Design: The anti-slip design is adopted to keep your drinks, snacks, and mobile phones stable on the tray. You don’t need to worry about items slipping off.

Application

It is suitable for bathtubs, indoor or outdoor swimming pools, spa pools, etc.

Specification

Color: Black

Rotation Angle: 360 Degrees

Material: 304 Stainless Steel, PP, ABS

Product Size: 59*37*53.5cm/23.2*14.6*21.1inch

Package Size: 62*40*11cm/24*15*4inch

Net Weight: 2.5kg/5.5lbs

Package Weight: 2.8kg/6.1lbs

Installation

• Put the connection tube into the base, and choose a suitable height. Put the 2 big screws into the 2 screw holes at the backside of the base, and tighten them to the end to hold the tube.
  
  
  
• Choose your favorite position on the tub wall, and connect the flat surface of the base with the tub wall.
  
  
  
• Tighten the 8 small screws to the tub wall through the screw holes on the base, then use the black plastic plugs to cover the holes.
  
  
  
• Put the white plastic coupling into the hole on the backside of the tray, then put the stainless steel tube into the coupling to the end.
  
  
  

Package Included

1* Tray

1* Base

1* Stainless Steel Tube

1* Black Plug Cover

Other Accessories for Assembly

Notes

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.