Watsons StreetWorks placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. Included is a discrete camera that peaks out over your license plate making installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. No backup switch on your transmission, no problem. Just turn on the system with a simple switch (not included). The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you. Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment. The mirror measures 3" by 6" overall and the base is 2-½" by ¾". The arm is 2-½" long. The screen has several adjustments including contrast, brightness, etc. The kit includes the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions. The license plate camera mounts behind your plate with just the tiny camera sticking over. Run the wire through a small, 7/32"; hole. Designed and assembled in the USA by Watsons StreetWorks.
WARNING: 