1 Pack White and Red LED Brake Light Trailer Hitch for 2 Inch Tow and Hitch Receiver -

1PC White & Red LED Brake Light Trailer Hitch for 2" Towing & Hauling Receiver1PC White & Red LED Brake Light Trailer Hitch for 2" Towing & Hauling Receiver Please make sure you have a 2" rounded square hitch receiver that matches the rounded square opening of the hitch lightItem Specification Leaving an empty unused hitch receiver can build up dirt and debris from the road Not to mention it looks dull and boring Add a functional feature which provides style and safety using the latest LED technology"DO NOT TREAT ON ME"This Hitch Cover features 80 LEDs dim driving light and brighter brake light when brakes are applied and 9 LEDs when it is put in reverse to provide additional measure of visibility for other drivers  This can be installed in minutes It fits 2" hitch receivers and uses the standard 4 way flat plug  NOTE: Locking Pin is NOT inclued, but required (Sold separately)☛Feature:100% brand new as shown in the pictureMade of high quality base w/ smoked lensLED lighting for less power draw at only 0224 amperesPowerful pods featuring high output LEDs and 168 lumensSize: 5" x 4" x 65"Comes with four way connector that provides running light, brake light and reverse light functionsUniversal fit all pickup, trucks, SUV, for Jeep with Class III 2" x 2" hitch receiverDOT SAE approvedGreat way to upgrade your car with better lighting capabilities☛Specification:Lens color: SmokedLED Driving and Brake Lamp (80 LEDs)LED Reverse Lamp (9 LEDs)Driving Lamp, brake lamp and reverse lampFits 2" x 2" hitch receiverStandard 4 Way Flat PlugLocking Pin is NOT inclued, but required (Sold separately)Requires hard wiring the white wire to the vehicle's reverse lightUse Notes:The trailer hitch mounted LED tail brake light will not blink while your turn signals are exclusively in use However, it will blink if both your brake lights and your turn signal lights are active☛Fit for:Universal fit all pickup, trucks, SUV, for Jeep with Class III 2" x 2" hitch receiver Please make sure you have available space in your car for these lights to fit before placing order☛Package included:1PC LED Tow Hitch Driving & Brake LampNOTE: Locking Pin is NOT inclued, but required ☛Installation:Direct replacement, plug the socket, requires hard wiring the white wire to the vehicle's reverse lightNote: Professional installation is highly recommended!☛ FAQ  Q: Why does the LED brake light fits the tow hitch, but feels loose?A: The tow hitch cover is only secured by the tow hitch lock to make sure that it does not fall off, so the lock is not completely tight There is already some foam in the inner side of the tow hitch cover, but if you feel that you would like the tow hitch cover to fit more snug, you can always add some foam to hold the tow hitch cover in placeQ: What if the LED brake light wiring is not long enough for my vehicle?A: The length of the wire for the LED brake light is designed to work for most trucks and SUVs with a tow hitch In some rare cases, if the wiring is too short, you can extend the wires Cut the adapter wires and extend the wiringQ: Why does the LED brake light not light up after I plugged in the adapter?A: In some rare cases, the vehicle's positive/negative is reversed The LED assembly is polar sensitive, the polarity reverse causes LED to not light up This is rare but can be fixed Take the adapter and cut the wires Flip the wires to reverse the polarityQ: Why does a message asking me about a trailer mode pop up on my dashboard computer after I installed the rear LED brake light?A: Newer trucks like the 2018 for Ford F-150 can detect if the power socket under its tailgate is in use Plugging in the 15-LED brake light will trigger this message which is completely normal You may either disable trailer mode when the prompt comes up or ignore the message