Air Test Fitting Tool, Oil Rail Adapter Leak Test Kit Fit Ford 6.0L Powerstroke

Features: 1. Fitment: Perfectly work on Ford 6.0L powerstroke diesel high pressure oil system.   2.Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.   3. Oil Rail Adapters: Both brass adapters use standard 1/4"" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.   4. IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings; It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.   5. 100% Satisfaction Guarantee: If you're not 100% satisfied with our tools, simply return it for a full refund in 60 days. Premium Support & 12-Month Warranty.   Notes for usage: 1.The complete system can be tested in under 20 minutes - in a professional repair facility this tool will pay for itself after one or two repairs. To connect, just remove the air cleaner, FICM, and coolant degas bottle (Turbo removal is NOT required). Remove the IPR valve and thread in the tool, hand tightening using the hose is sufficient.   2.Connect shop air and listen for leaks. To locate the smallest leaks close the shutoff valve on the tool to seal the system. If desired a scan tool can be used to monitor air pressure in the system by observing the ICP sensor reading. This is not a required step.   3.To prevent costly combacks we recommend air checking every 6.0L for high pressure oil leaks after any part of the system has been disassembled.   Warnings: 1. Our tool has 1/4 inch pipe threads to accept standard air fittings. You will need to add your own air line quick-connect fitting.   2. Avoid cranking the engine with this tool connected since the IPR valve is not in place to provide pressure relief, the high pressure oil pump would effectively be dead-headed and pump, system, tool, or personal damage could result.   3. Always wear protective eye-wear. This tool is intended for usage by trained professionals. By using it you are certifying that you have the necessary skills and training to do so safely.   Package Included: 1 x Air Test Fitting Tool 2 x Oil Rail Adapters