About this item
|Shipping Weight (in pounds):||12.2|
|Product in Inches (L x W x H):||9.0 x 36.0 x 11.75|
|Assembled in Country of Origin:||Imported|
|Origin of Components:||Imported|
Ask a question
If you would like to share feedback with us about pricing, delivery or other customer service issues, please contact customer service directly.
Walmart does not sponsor, recommend or endorse any third party product or service, or any customer ideas or advice.
Questions will be checked against our question guidelines and posted within five to seven business days.
- There are two screws at the top of each of the two bars/bookends with three screws along the back of the bookshelf.by mndiyer11/28/2011Was this answer helpful? (0) (0)Was this answer helpful?
- Three upper screws and then four screws down on the legs. I recommend using plastic wall secure-ers in addition because its heavy - I kind of did that instead of stud finding because I have good walls and I wanted it in a specific space. A standard dill doesn't fit to screw in the top screws because of the legs and the tray/shelf top. So def use the small stick hand held electric ones their probably the only ones you could drill it with and is what I had to use.by jfnnv7/6/2011Was this answer helpful? (0) (0)Was this answer helpful?
- It attaches with four screws (provided). There are two sets of metal tabs with screw holes attached to the left and right rear frame, pointing inward. The lower set is about 3/4" above the base and the upper set is about 10 1/4" above the base. So for most walls you would place the rack where you want it, mark the screw holes on the wall with pencil, drill four holes (using a masonry bit if necessary) and put in wall anchors to accept the screws.by DolphinBoy2/26/2012Was this answer helpful? (2) (0)Was this answer helpful?