Rated 4 out of 5★ by 1reviewer.
Rated 4 out of 5★ by RetiredTechnician Great Price on a Bias Trailer Tire I bought this tire/wheel combo as a spare for our trailer. Keep in mind this is a ābiasā tire, not a āradialā. This is the lowest price on this size trailer tire I found anywhere. Although I havenāt put the tire on the ground, I see no noticeable flaws. The tire manufacture date code is 3313 (33rd week of 2013), approximately 7 months old when received. And delivery time, unbelievable ā¦ less than 48 hours from order time to āpickup at the storeā time.Iām only giving it 4 stars, not because of the tire/wheel quality, but because of the lack of sizing information on Walmartās web page. This is vital information one needs to order, so Iām providing it here. These measurements are approximate as (needless to say) I didnāt remove the tire (Most of these measurements should be done on an unmounted wheel).Bolt Pattern (On 5 bolt wheels, measured from āthe farthest edge of hole oneā to āthe center of hole 3ā): 5 bolt x 4.5ā.Wheel Width (Distance between inside of bead flanges, rounded to nearest ★½ā): Since I canāt measure the inside of the flanges, I can only guess. From the āoutside most edge of one flangeā to āthe outside most edge of the other flangeā (NOT WHEEL WIDTHā) is approximately 6ā; so Iām guessing the wheel width is either 5ā or 5.5ā. Wheel says ā15x5 1/13ā which I assume would mean 15ā x 5ā manufactured on Jan 2013. The tire says āRim 5.50ā. I donāt know if that means the wheel width should be 5.5ā; or 5.5ā maximum; or 5.5ā minimum.Hub Hole: Approximately 3.25ā.Backspacing (The distance from āthe surface of the wheel that mates with the axle hubā to āthe farthest most inboard edge of the wheelā --- not tire as someone previously stated): 3āOffset (The distance from āthe surface of the wheel that mates with the axle hubā to āthe centerline of the wheelā): ZeroāLoad Range C: 1820 lbs @ 50 psi (wheel is rated at 1870 lbs).Disclaimer: These measurements are approximate. Donāt order based on these numbers. Do your own measuring. 03/27/2014