3M Filtrete Under-Sink Advanced Water Filtration System
Customers also considered
About this item
About this item
Important Made in USA Origin Disclaimer: For certain items sold by Walmart on Walmart.com, the displayed country of origin information may not be accurate or consistent with manufacturer information. For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information.
With the 3M Water Filtration System, you can have cleaner and better tasting water at your convenience, fresh from your tap. The under-sink advanced water filtration system is easy to install with no mess. This 3M filtration system uses long-lasting replacement filters that can be changed with just a twist of your screw driver. All you need to install the under-sink advanced water filtration system is an adjustable wrench and a screw driver. Parasitic cysts may or may not be in your water, but this system will remove any trace of them to provide healthier water. The 3M Water Filtration System provides a significant reduction of chlorine taste and odor, sand, sediment, rust and soil. It can be installed in less than 30 minutes and offers a six-month filter life. The 3M filtration system maintains full water flow and requires no dedicated faucet head.
3M Filtrete Under-Sink Advanced Water Filtration System:
- Removes parasitic cysts to provide healthier water
- Provides enhanced reduction of chlorine taste and odor, sand, sediment, rust and soil
- Installs in less than 30 minutes
- Offers 6-month filter life
- Maintains full water flow and requires no dedicated faucet head
- Only two tools required for installation: screwdriver and wrench
|Assembled Product Dimensions (L x W x H):||15.00 x 3.00 x 3.00 IN|
Ask a question
If you would like to share feedback with us about pricing, delivery or other customer service issues, please contact customer service directly.
Walmart does not sponsor, recommend or endorse any third party product or service, or any customer ideas or advice.
Questions will be checked against our question guidelines and posted within five to seven business days.
- The tubing needs to be completely seated in the hole. Once fully seated, try pulling the hose out - you should see the colored ring move out with the hose slightly, but the tube will stay firmly attached. To intentionally remove the hose, depress the colored ring while pulling on the hose.by SpookyFCO1/6/2016Was this answer helpful? (1) (2)Was this answer helpful?
- 2000 gallons or six months,If you are unsure go by six months,I do.Another way is once your used to it and the water flow.The water flow will start to slow down when the filter reaches the end of its life and the filter will become clogged like a fuel filter on your car and will slow down and need to be replaced.by mcknzy8/27/2015Was this answer helpful? (2) (0)Was this answer helpful?
- It says 6months or 2000 gallons, I assume when it becomes filled with minerals and sediment it will reduce it's flow rate drastically. It also says in the directions that when it slows down to replace the filter. It also depends on how bad/hard your water is as well.by Woody19862/26/2013Was this answer helpful? (0) (0)Was this answer helpful?
- Normal use 2000 = about 6 months.by CC1011/9/2013Was this answer helpful? (0) (0)Was this answer helpful?
- 2000 gallons is the standard usage for a "normal" home sink for a 6 month period. Otherwise you would have to install a water meter only iat the outle side if the filter. If you are not sure that your home is "normal" don't use this filter. A filter with a meter attached would cost much more.by MmAaFfIiAa6/26/2015Was this answer helpful? (0) (1)Was this answer helpful?
- You cannot just check your water bill because there are too many variables, and too many outlets for the cold water system. Most of your cold water usage is for flushing the toilet(s) and not for consumption through the kitchen faucet where this filter is installed. There is no formula to accurately compensate for these variables. The filter should get clogged and start to restrict the flow over time with more usage. Try to track or estimate how much cold water is going through this installation on a daily basis & then you can guess how long it will last. It might be about 1.5 gallon per person per day on average.by RideTex9/27/2012Was this answer helpful? (2) (0)Was this answer helpful?
- average is about every six monthsby shopaholic347/4/2012Was this answer helpful? (0) (0)Was this answer helpful?
- On your water bill it will tell you how many gallons of water you use each month. Half of that will be cold water, approximately. Divide the amount of cold water by how many faucets you have. For example, 1200 gallons of cold water and you have 4 faucets in your home would be 300 gallons each faucet. In 6 1/2 months you would use approximately 2000 gallons.by mesamikey1/6/2016Was this answer helpful? (0) (6)Was this answer helpful?
- No reason you couldn't do it. Just need to replace cold water single tap valve with a double tap valve. One for original faucet and one going to seperate faucet.by AJH659/25/2015Was this answer helpful? (3) (0)Was this answer helpful?
- Yes,you will need a spitter for the water supply,One for the sink and one to the filter.Water going to the faucet will be normal and the one going to the drinking faucet will be filtered.by mcknzy5/30/2015Was this answer helpful? (2) (1)Was this answer helpful?
- You could, but I'd suggest buying a model with a spout already in the package as it would be cheaper.by Woody19861/9/2015Was this answer helpful? (1) (1)Was this answer helpful?
- http://www.walmart.com/catalog/product.do?product_id=13037963 get "water pump pliers"by CC1016/17/2015Was this answer helpful? (0) (2)Was this answer helpful?
- I bought this so I could keep my Street Pressure and filter all cold water in my Kitchen sink. I would recommend another kit that has all the parts you will be looking for, in it.by CC1017/28/2015Was this answer helpful? (0) (0)Was this answer helpful?
- Yes. Any cold water water source.by MmAaFfIiAa11/15/2012Was this answer helpful? (0) (0)Was this answer helpful?
- i would chose a kit specifically for that-this would not work im afraidby shopaholic347/18/2012Was this answer helpful? (0) (1)Was this answer helpful?
- Yes. A plumber will have the parts you need to accomplish this.by mesamikey9/26/2015Was this answer helpful? (2) (0)Was this answer helpful?
- It filters all the cold water that runs through your kitchen sink. Hooks up directly to your current cold water line.by Vinelady6/4/2014Was this answer helpful? (0) (0)Was this answer helpful?
- It will filter all cold water coming from the sink, if you want one that turns off buy the model with a spout.by Woody19862/26/2013Was this answer helpful? (0) (0)Was this answer helpful?
- This is a filter that you will not see a change in water pressure. yes it should be tied to the cold water side directly, under the sink.by CC1011/9/2013Was this answer helpful? (0) (0)Was this answer helpful?
- If you install a bypass line by installing a tee to the inlet and outlet. Also a 1/4 turn valve on the filter side of your inlet line to shut the fiter down. You would still have some of your unfiltered water in your outlet when you go back to the filter so let the water run for a second before using to clear the line. I would not suggest a bypass. Too much work extra spot for a leak.by MmAaFfIiAa5/5/2015Was this answer helpful? (1) (0)Was this answer helpful?
- only the cold will be filteredby shopaholic3410/6/2012Was this answer helpful? (1) (0)Was this answer helpful?
- It will filter 100% of the water at the faucet where it is installed.by mesamikey4/10/2016Was this answer helpful? (1) (3)Was this answer helpful?
Customers also viewed these products
- $44.23 Was $63.17Save $18.94
- $18.73 Was $26.75Save $8.02
- $77.33 Was $97.94Save $20.61
- $25.39 Was $36.27Save $10.88
- $20.97 Was $24.88Save $3.91