Naxa NT-52 Digital Television Converter Box
Customers also considered
Customers also bought these products
About this item
About this item
Important Made in USA Origin Disclaimer: For certain items sold by Walmart on Walmart.com, the displayed country of origin information may not be accurate or consistent with manufacturer information. For updated, accurate country of origin data, it is recommended that you rely on product packaging or manufacturer information.
Easily convert an analog television signal to a digital ATSC signal with the Naxa NT-52 Digital Television Converter Box. This unit is built with a high-sensitivity tuner that is equipped with audio and video support. Channel programming can be configured automatically. This ATSC converter box includes a multi-language on-screen display to accommodate a wide range of users. This electronics accessory also comes with a remote and an UL/ETL listed AC adapter.
Naxa NT-52 Digital Television Converter Box:
- Provides conversion of digital ATSC signal to NTSC analog televisions
- Built-in high-sensitivity tuner supports stereo audio and video outputs
- Features automatic channel programming, EPG guide display functionality and multi-language on-screen display
- This TV signal converter box includes remote and UL/ETL listed AC adapter
|Product Type:||Digital TV tuner|
|Connector Type:||RF input - rear USB 2.0 ( 4 pin USB Type A ) - front RF output - rear Digital audio output (coaxial) ( RCA phono ) - rear Component video output ( RCA phono x 3 ) - rear Composite video/audio output ( RCA phono x 3 ) - rear|
|Shipping Weight (in pounds):||0.57|
|Product in Inches (L x W x H):||5.9 x 4.13 x 1.4|
Ask a question
If you would like to share feedback with us about pricing, delivery or other customer service issues, please contact customer service directly.
Walmart does not sponsor, recommend or endorse any third party product or service, or any customer ideas or advice.
Questions will be checked against our question guidelines and posted within five to seven business days.
- Yep.by EquallyWrongToo6/22/2015Was this answer helpful? (1) (1)Was this answer helpful?
- No. Mine works without one.by Greg14141/19/2016Was this answer helpful? (1) (2)Was this answer helpful?
- Hi Daisy, Yes, the converter requires an antenna of some sort connected with a 75ohm coaxial. But any standard TV antenna will work. As antennas go it's the bigger the better. The higher it is from the ground the better the reception. If your location is near to the majority of the transmitters in your area rabbit ears might work for you. If you are far away from them you will need a larger mast elevated antenna, and possibly an antenna amplifier, for optimal reception. FYI-The antenna power feature on the NT-52 does not function properly. .by All4FunOC10/8/2015Was this answer helpful? (3) (0)Was this answer helpful?
- I just bought one of these, and did not know needed an antenna. Ok, so if your TV's are older you need a antenna. My one TV that is 2 years old did not, but I can tell though with a antenna you get more stations. I bought the flat box antenna and the old time rabbit ears that have been revamped....the rabbit ears have more excellent selection. The other flat box works but you get more channels on the 10.00 rabbit ears. A tip on antenna's the closer to a window the better for clear signals. I have mine high up like at 5 feet, very clear. I hope this will keep some from being frustrated. If you have the fiance you can get the outside mount antenna, you will have to mount to roof or pole, and than the cord. By the way I get almost as many channels as I did on basic cable. If you have a metal roof or metal frame house, your reception will be poor.by CjAvery10/8/2015Was this answer helpful? (11) (0)Was this answer helpful?
- I'm guessing that's a yes. I'm buying a converter box to go with the digital antenae I bought.by momof6cuties11/25/2015Was this answer helpful? (4) (2)Was this answer helpful?
- Yep.by EquallyWrongToo6/3/2015Was this answer helpful? (3) (0)Was this answer helpful?
- Yes it can , the only thing is that you have to set the channel you want to record on the box. Then you can set your timers on the vcr to record it.by Electronicman16/3/2015Was this answer helpful? (2) (0)Was this answer helpful?
- Yes. Connect a video cable splitter : one goes to TV, the other to VCR.by Greg14146/23/2015Was this answer helpful? (3) (0)Was this answer helpful?
- Hook up the antenna to the antenna in connection on the naxa converter box, then connect up the audio video cables to the tv.by Electronicman11/4/2015Was this answer helpful? (1) (0)Was this answer helpful?
- It comes with instructions. Connect the antenna wire to "IN" plug on the Naxa, and use an additional antena cable to connect the "out" plug from Naxa to your TV.by Greg14141/4/2015Was this answer helpful? (1) (0)Was this answer helpful?