|
Features: -For grip wrenches using single-lead thread adjusting screw.-Adapter threads onto a slide hammer with a 5/8"–18 thread.-Single Lead Grip Wrench Adapter. Includes: -Grip wrench threads onto 7/16"-l4 end of adapter for pulling useThis is usually included in most of the OTC pu…
|
|
Features: -Saw blade.-Metal cutting band.-Made to exacting standards, specially set and sharpened for clean, fast cuts.-Every blade is made of highest quality steel and is 100pct inspected to assure maximum strength in the weld joint.-For fast cutting in all woods, plastics, and compositions.-18 tpi…
|
|
Features: -Band saw blade.-For general purpose cutting in ferrous and non-ferrous metals.-Bench top carbon steel band saw blade.-1'' minimum radius.-.014'' gauge.-18 tpi.-59-1/8''.-Carded. Dimensions: -3/8'' width.
|
|
Vermont American 15482 6-inch Magnetic Bit Holder
|
|
Features: -Cut widths from 3/16'' to 13/16''.-Change sizes without removing dado form saw.-Use with 9'' and 10'' table and radial arm saws.-For cutting wood, wood products, and plastic laminates.-Cut dadoes, rabbets, splines, lap joints, and other jobs.-Packed in molded plastic storage case.-Carbide…
|
|
Vermont American 16615 Screw Pilot Countersink Set - 4-Piece
|
|
Vermont American 15493 6-in-1 Multi Bit Magnetic Screwdriver
|
|
2 Piece Hose Clamp Plier Set
|
|
7-Ton Multi-Purpose Bearing and Pulley Puller Kit
|
|
Vermont American 15516 6-in-1 Magnetic Multi Bit Torx Screwdriver
|
|
Features: -For internal or external snap rings.-Thumbscrew permits quick conversion.-Made of heavy-gauge tempered steel.-Contained in a blow molded case.-4512-1 - .090" tip - straight pliers.-4512-2 - .090" tip - 90º pliers.-4512-3 - .070" tip - straight pliers.-4512-4 - .070&quo…
|
|
Features and Benefits: Works on pulleys with hub diameters of 1-1/8-inch, 1-1/4-inch, 1-5/16-inch, and 1-3/8-inch With split collet design, the jaws grip the pulley flange for damage-free removal Mechanical screw power The 7185 tool removes pulleys on most Chrysler, Ford, GM, and VW vehicles,…
|
|
Vermont American 30047 12-Piece Jig Saw Blade Set |
|
Allows technician to access the flat-type hose clampslocated in hard-to-reach areas, Pliers has locking mechanism to hold clamp in the openposition making removal and installation of clamp easier, Heavy-duty 24'' cable flexes to almost any position, Pliers is spring loaded to the open position, ,
|
|
Features and Benefits:
|
|
Vermont American 16901 The Buffer Polishing Bonnet
|
|
Features: -You'll find many uses for this heavy duty strap wrench.-The 53" long nylon strap won't mar precision surfaces of shafts, pulleys, or other components.-Especially useful on small engine pulleys.-Special head design self-tightens the strap as force is applied.-Lightweight, with a 12&qu…
|
|
Features: -Ideal for steel, wood, and plastic.-Precision crafted from premium high speed steel.-Hardened and tempered for long life and high performance.-118 point for general purpose drilling applications.-Carded. Includes: -13 piece set includes one each 1/16'', 5/64'', 3/32'', 7/64'', 1/8'', 9/64…
|
|
Features: -Maximum spread: 1-7/16".-1-7/16'''' Spread External Snap Ring Pliers. Dimensions: -Length: 7-3/4".-Weight: 8 oz. Removes external retaining rings used to locate bearings on shafts of transmissions, differentials, etc.. Warranty: -Lifetime warranty does not cover abuse. Features …
|
|
Features: -Used in OTC canister-type cleaning devices.-No. 7000 - Pro Inject-R Kleen injector cleaning fluid.-Ready to use right out of the can; no mixing.-NOTE: Not for use as a fuel additive.-DO NOT pour into fuel tank Fluid Clean fuel injectors mean cleaner running, more efficient engines with lo…
|
|
Features: -For use with 12 ton and 20 ton bottle jack presses.-Accessory Set for Bottle Jack Presses. Includes: -Total weight: 33 lbs., 8 ozThis is an excellent add on accessory set for hydraulic presses and bottle jack presses. Includes 1890 9" long V-block set, 215703 1-1/2" diameter V-p…
|
|
Features: -Feature a 1/2" square drive.-2 9/16" rounded hex locknut socket.-Can be used with an extension and torque wrench for accurate tightening.-Works on 1990-92 Dodge trucks with Dana 60 Manual hubs. Dimensions: -2-9/16'' 1/2'' Drive 6 Point Hex Locknut Socket. Warranty: -Weight: 1 lb…
|
|
Features: -Lug Nut Cap Remover. Warranty: -No warranty. Features and Benefits:
|
|
Features: -This tool firmly holds the torsion bar on Ford light-duty trucks while you adjust or service the front suspension.-Ford Truck Torsion Bar Tool. Specifications: -Without it, a torsion bar could unwind and possible cause damage The tool fits 1997-2003 Ford F-150 4WD pickups, 1995-2001 Ford …
|
|
Features: -Premium quality blade.-Continuous rim for smooth cutting in concrete, block, and general masonry.-Turbo rim for chip-free cutting.-Lasts 85 times longer than abrasive wheels. Dimensions: -7'' diameter.
|
|
Features: -Precision-ground cutters for fine woodworking.-Produces accurate plugs from any type of wood.-Hardened-steel alloy bodies for long life.-Use to fill counter-bored holes.-1/4'' shanks.-Carded. Includes: -3 piece set includes 3/8'', 1/2'', and 5/8'' plug cutters.
|
|
Features: -For easy removal of most harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft.-A bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage.-A heavy duty, 3/4" diameter forcing screw is internall…
|
|
Features: -The tool applies straight, even pulling power without damaging components.-Works on Case, Caterpillar, GM, John Deere, Waukesha and White diesel engines.-Fuel Injector Nozzle Puller. Construction: -This nozzle puller was designed to remove pencil nozzles used in many agricultural and cons…
|
|
Features: -Minimum spread of 1/2" and maximum spread of 9".-Use with puller Nos. 1035, 1040, 1041, 1042, 1065,1063 and 938.-Weight is only 12 lbs. 9 oz..-5/8" - 18 thread of tapped hole in adapter.-6" distance between adjusting screwsThese versatile accessories feature “kni…
|
|
Features: -Puller jaws can be set up for 10-way internal or external jobs.-Attachments include a dent puller, internal/external pulling jaws, puller hook attachment, rear axle pulling attachment, and a grip wrench adapter.-10-Way Slide Hammer Puller Set with Plastic Case. Assembly Instructions: -Com…
|
|
Vermont American 17112 1/2-inch x 1-1/2-inch Fluted Dowel Pin - 18-Pack
|
|
Vermont American 17111 3/8-inch x 1-1/2-inch Fluted Dowel Pin - 30-Pack
|