Tools & Equipment

5 Ton Bar Style Puller Set

Harmonic Balancer Puller/Installer Set

Ford Valve Spring Compressor Tool

Features and Benefits:

• Works on domestic or imported vehicles that have carburetors
• Uses standard 14 ounce propane cartridges

This kit ensures a correct idle mixture and compliance with emission standards.

OTC OTC2015A Stinger 1,500 Lb. Capacity Underhoist Stand

Features: -Saddle measures 3-1/4" x 3-1/4".-24" x 24" x 24" tripod base.-Stinger 2-Ton Capacity Underhoist Tripod Stand. Dimensions: -Lifting height: of 58-7/8" to 91-5/8". Warranty: -2 yr warranty on material and workmanship w/ POP. Features and Benefits:

Cooling System Pressure Tester

Features and Benefits:

• Includes a universal adapter for vehicles with thermacor systems
• Works on domestic and imported vehicles
• Exhaust back pressure gauge with universal adapter

Now you can quickly read back pressure to determine the …

Features: -Designed for use with the industry standard OTC 7248 C-Frame.-Updates the OTC 6530 Master Ball Joint Kit to include GM light trucks and SUV's.-For use on 1995-2004 GM light trucks and SUV's.-GM Ball Joint Adapter Update Kit. Construction: -Made of sturdy steel construction. Specifications…

Features and Benefits:

• This 2/3 jaw puller has a 7 ton capacity
• Features long jaws
• Maximum reach: 8-3/4-inch; Maximum spread: 11-inch
• Screw size: 11/16-inch - 18 x 9-inch
• Jaw thickness: 11/32-inch; Jaw width: 1-inch

This comp…

Ford Crankshaft Positioning Tool

Features: -Use with the No. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints, and the offset ball joints used to change caster/ camber..-Wt., 3 lbs..-Dodge Ram / Jeep Ball Joint Service Adapter Kit. Specifications: -Works on: 1984-newer "do…

Features: -Use with ball joint service set Nos. 6530, 7248, and 7249.-Honda Lower Ball Joint Tool Set. Specifications: -Remove and install both sizes of ball joints on Honda 1986–97 Accord, 1988–00 Civic, 1993–99 del Sol, 1988–91 CRX, and 1983–98 Prelude This new set of…

Features: -Allows easy removal and installation of the lower ball joint on 1996-2004 Ford Taurus and Mercury Sable vehicles.-Adapters are used with OTC7248 C frame  .-4 Piece Taurus/Sable Ball Joint Adapter Kit. Assembly Instructions: -Lower ball joint can now be replaced without having to repl…

Features and Benefits:

• This 2/3 jaw puller has a 7 ton capacity
• Features reversible jaws
• Maximum reach: 5-inch, Maximum spread: 10-1/2-inch
• Screw size: 11/16-inch - 18 x 9-inch
• Jaw thickness: upper - 5/16-inch, lower - 11/32-in…

Features and Benefits:

• Operates on many models with engine in chassis
• Pilot bearing puller
• Weight: 3 pounds, 7 ounces
  

Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used.

Features and Benefits:

• This helpful tool uses a forcing screw press to safely remove and replace automotive universal joints with needle bearings, including GM plastic pin CV U-joints

5-Ton 2/3 Jaw GripLock Puller

GM Ball Joint Adapter Update Kit

Features: -Bleed valve eliminates air from injection system and can be used to reduce pressure when disconnecting hoses.-Repair Only. Includes: -Includes 6-ft. bleed hose and 30" pressure hose. Assembly Instructions: -Bleed valve also allows gauge assembly to be used to check fuel  pump vo…

Features: -Ford Valve Spring Compressor Tool. Specifications: -Works on: 1991–2004 Ford vehicles with 4.6L, two-valve, V8 engines; 4.6 4V, 5.4 V8 and 6.8 V10. Dimensions: -Weight: 6 oz. Compresses valve springs for quicker, easier camshaft, valve seal, valve spring, or retainer service-because…

Features: -Features the popular "pickle forks" in a blow molded case.-Used to remove shock linkage, tie rods, and ball joints.-5 Piece Separater Set. Includes: -Also great for general service on many cars and light trucks Set includes: OTC6531 – Size 11" x 1-1/8" Fork Sprea…

Features: -Removes damaged, stuck-in glow plugs on diesel engines without having to remove cylinder head, saving hours of service time.-When glow plug tip is melted and plug cannot be removed without breaking it off, this tool is the only answer.-Services diesels in popular 3/4 and 1/2 ton pickups.-…

Separater Set - 5-Piece

Features and Benefits:

• The basic slide hammer unit can be removed and used independently
• This puller with a 2-1/2 pound hammer, 2-way and 3-way head is 27-inch in length
• The inside 2-jaw spread minimum 1-1/4-inch to the maximum 3-1/2-inch and the outsid…

Features: -This helpful tool uses a forcing screw press to safely remove and replace automotive universal joints with needle bearings, including GM plastic pin CV U-joints.-U-Joint Removing/Installing Tool.-Repair Only. Features and Benefits:

Flange-Type Puller Set

Large C-Frame Adapter Kit

Features: -Derived from patented OE design.-Works with industry standard OTC7248 C-frame.-Facilitates both removal and installation of ball jointsBall joint adapter kit for use with OTC7248 C-Frame on 2003-2007 Honda Accord sedans, 2003-2007 Honda Accord coupes and 2004-2007 Acura TSX..-Honda/Acura …

Features: -Measure rotational speed of gears, motors, engines, fans, compressors, generators, pulleys, grinding wheels, drills, saws and hones extremely accurately.-The phototach is equipped with a laser pointer for accurate targeting.-Non-contact design results in (zero) torque loss for true precis…

Dodge Ram / Jeep Ball Joint Service Adapter Kit